Brass Fittings
Our brass fittings are manufactured from high quality CA360 brass material stock. These brass adapters are ideal for low to medium pressure applications, including water, refrigeration fluids, instrumentation controls, greases, fuels, LP and natural gasses.
Sort by:
SAE Brass Fittings
SAE 45° JIC brass adapter fittings have a 45° cone seat on the female adapter & a 45° flare on the male adapter.
Brass NPT Pipe Fittings
Brass adapter hydraulic fittings use a NPT (National Pipe Tapered) thread that seals when the male taper mates with the female taper.
Brass Compression
Flareless compression brass adapter fittings can be used with a wide variety of tubing.
Brass British and Metric Fittings
Brass adapter hydraulic fittings use a NPT (National Pipe Tapered) thread that seals when the male taper mates with the female taper.
Brass Air Brake Fittings
Hydraulic Hoses supplies a wide variety of brass adapters. Our Brass Air Brake fittings are designed for use on truck and bus compressed air brake systems and are DOT approved. Max operating pressure is 1,200 PSI.
Copper Air Brake Fittings
Hydraulic Hoses supplies a wide variety of brass adapters. Our Brass Air Brake fittings are designed for use on truck and bus compressed air brake systems that are plumbed with copper tubing. Our brass Air Brake Copper Tubing fittings are DOT approved. Ma
Brass Hose Barb
Brass Hose Barb fittings are barbed on one end. The barbs are slanted backwards for insertion into a hose. Our Hose Barb fittings are designed to install easily and quickly without the use of clamps or ferrules.
Brass Inverted Flare Fittings
Brass Inverted Flare fittings are designed with an internal seal that allows for tighter tube bends. Because the seal is internal, the threads are protected and provide excellent vibration resistance. Max operating pressure is 1,200 PSI.
Brass Push On
Brass Push Lock Hose Barb fittings do not require clamps or ferrules to install. These fittings are ideal for low pressure applications.
Brass Push-In
Brass Push-In fittings are a type of compression fitting that allows air and water lines to be attached without the use of tools. Because Push-In fittings are designed to install without tools and be easily removed, they can reduce assembly time versus t
